LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1197 (Lighting Systems) >> Repair Instructions >> Repeater Lamp Bulb Replacement (Europe Japan) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheelhouse filler panel. Refer to WHEELHOUSE FILLER REPLACEMENT in Body Front End.
  2. Remove the front side repeater lamp socket from the front side repeater lamp assembly.
  3. Remove the bulb from the socket.
    Fig 1: Removing Bulb From Socket
    G01453370Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals