LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1197 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal/Side Marker Lamp Bulb Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the front fascia lower closeout panel. Refer to CLOSE OUT PANEL - FRONT BUMPER FASCIA LOWER in Bumpers.
  3. Release the brake caliper cooling duct from the front fascia, and position the duct aside.
    Fig 1: Releasing Brake Caliper Cooling Duct From Front Fascia
    G01453384Courtesy of GENERAL MOTORS CORP.
  4. Remove the appropriate socket from the lamp assembly.
  5. Remove the bulb from the socket.
    Fig 2: Removing Bulb From Socket
    G01453385Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals