LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1197 (Lighting Systems) >> Repair Instructions >> Marker Lamp Replacement - Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the nearest outer tail lamp. Refer to TAIL LAMP REPLACEMENT .
  2. Remove the two nuts attaching the radio antenna bracket and position the antenna for access to the side marker lamp if equipped with a power antenna.
  3. Remove the sidemarker lamp socket from the sidemarker lamp.

    Access the sidemarker lamp through the tail lamp opening.

  4. Remove the sidemarker lamp retaining nuts.
  5. Remove the sidemarker lamp.
    Fig 1: Sidemarker Lamp Retaining Nuts
    G01453372Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals