LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1194 (Automatic Transmission - 4L60-E/4L65-E (Service & Replacement)) >> Repair Instructions >> Automatic Transmission Range Selector Cable Adjustment

Automatic Transmission Range Selector Cable Adjustment

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Shift the transmission into NEUTRAL.
  3. Using a flat bladed screwdriver, carefully pry to release the transmission shift control cable adjustment lock.
  4. Check to be sure that the transmission floor shift control is in the NEUTRAL detent position.
  5. Check to be sure that the transmission is in the NEUTRAL detent position.
    Fig 1: Prying To Release Transmission Shift Control Cable Adjustment Lock
    G01972897Courtesy of GENERAL MOTORS CORP.
  6. Press to secure the transmission shift control cable adjustment lock.
  7. Lower the vehicle.
    Fig 2: Pressing To Secure Transmission Shift Control Cable Adjustment Lock
    G01972898Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals