LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1188 (Engine Mechanical - 5.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Front Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft balancer. Refer to CRANKSHAFT BALANCER REPLACEMENT  .
  2. Remove the water pump. Refer to WATER PUMP REPLACEMENT in Engine Cooling.
  3. Remove the oil pan-to-front cover bolts (2).
    Fig 1: Locating Oil Pan-To-Front Cover Bolts
    G01970540Courtesy of GENERAL MOTORS CORP.
  4. Remove the front cover bolts.
    Fig 2: Removing Engine Front Cover
    G01970541Courtesy of GENERAL MOTORS CORP.
  5. Remove the front cover and gasket.
  6. Discard the front cover gasket.
  7. Clean and inspect the engine front cover. Refer to ENGINE FRONT COVER CLEANING AND INSPECTION .
scientia non olet · About LEMON Manuals