LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1188 (Engine Mechanical - 5.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement-Air Conditioning >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air conditioning (A/C) drive belt.

    Refer to DRIVE BELT REPLACEMENT-AIR CONDITIONING  .

  2. Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  3. Loosen the A/C drive belt tensioner bolt.
  4. Remove the A/C drive belt tensioner.
    Fig 1: Removing Air Conditioning Drive Belt Tensioner
    G01970363Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals