Valve Rocker Arm and Push Rod Removal

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Important: Place valve rocker arms, valve pushrods, and pivot support, in a rack so that they can be installed in the same location from which they were removed.

Remove the valve rocker arm bolts.
Remove the valve rocker arms.

Fig 1: Removing Valve Rocker Arm
Courtesy of GENERAL MOTORS CORP.
Remove the valve rocker arm pivot support.

Fig 2: Removing Valve Rocker Arm Pivot Support
Courtesy of GENERAL MOTORS CORP.
Remove the pushrods.

Fig 3: Removing Valve Rocker Arm Push Rods
Courtesy of GENERAL MOTORS CORP.