LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Engine Controls - Removal & Installation, Overhaul) >> Ignition Systems >> Camshaft Position Sensor >> Removal (3.8L)

Removal (3.8L)

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix, 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Remove the coolant recovery reservoir. Remove the drive belt. Disconnect the electrical connector from the Camshaft Position (CMP) sensor. See Figure. Remove the CMP sensor bolt. Remove the CMP sensor from the engine front cover.