LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Engine Controls - Removal & Installation, Overhaul) >> Engine Sensors & Switches >> Heated Oxygen Sensor >> Installation

Heated Oxygen Sensor: Installation

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix, 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. A special anti-seize compound is used on the oxygen sensor threads. The compound consists of a liquid graphite and glass beads. The graphite will burn away, but the glass beads will remain, making the sensor easier to remove. New sensors will have the compound applied to the threads.
  2. If a sensor is removed and is to be reinstalled, the threads must have an anti-seize compound applied before installation. Coat the threads of the HO2S with Anti-Seize Compound (12377953), if necessary.
  3. Install the HO2S and tighten to specification. See TORQUE SPECIFICATIONS . Connect HO2S harness connector. Lower vehicle, if necessary.
Fig 1: Locating HO2S 1 (3.1L & 3.4L)
G00114731Courtesy of GENERAL MOTORS CORP.
Fig 2: Locating HO2S 2 (3.1L & 3.4L)
G00114732Courtesy of GENERAL MOTORS CORP.


  1. A special anti-seize compound is used on the oxygen sensor threads. The compound consists of a liquid graphite and glass beads. The graphite will burn away, but the glass beads will remain, making the sensor easier to remove. New sensors will have the compound applied to the threads.
  2. If a sensor is removed and is to be reinstalled, the threads must have an anti-seize compound applied before installation. Coat the threads of the HO2S with Anti-Seize Compound (12377953), if necessary.
  3. Install the HO2S and tighten to specification. See TORQUE SPECIFICATIONS . Connect HO2S harness connector. Lower vehicle, if necessary.
Fig 1: Locating HO2S 1 (3.8L)
G00158331Courtesy of GENERAL MOTORS CORP.
Fig 2: Locating HO2S 2 (3.8L)
G00158332Courtesy of GENERAL MOTORS CORP.