Removal & Installation
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix, 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support the vehicle. Remove the left inner rear fender. Disconnect the EVAP canister vent valve electrical connector. See Fig 1. Disconnect the vent hose from the EVAP canister vent valve. Remove the EVAP canister vent valve from the bracket. To install, reverse removal procedure.