EVAP Canister Purge Solenoid: Installation
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix, 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
Position the EVAP canister purge solenoid on the intake manifold and install the retainer bolt. Tighten the EVAP canister purge solenoid retaining bolt to specification. See TORQUE SPECIFICATIONS . Connect the EVAP canister purge pipe and the vacuum supply hose. Connect the EVAP canister purge solenoid electrical connector.
Install the EVAP canister purge solenoid onto the EVAP canister purge solenoid mounting bracket. Connect the EVAP canister purge valve purge pipe and vacuum supply hose. Connect the EVAP canister purge valve harness connector. Install the fuel injector sight shield.