LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1179 (Steering Wheel And Steering Column) >> Repair Instructions >> Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Telescoping) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the SIR coil assembly. Refer to SIR COIL ASSEMBLY .
  2. Remove the following from the steering shaft:
    1. 2.1. shaft lock shield (5)
    2. 2.2. turn signal cancel cam assembly (4)
    3. 2.3. upper bearing spring (3)
    4. 2.4. upper bearing inner race seat (2)
    5. 2.5. inner race (1)
      Fig 1: Locating Steering Shaft Components
      G01419167Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals