LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1175 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Evaporator Drain Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the HVAC module drain tube to the module.
    • Ensure that the drain tube is fully seated to the HVAC module.
      • Fig 1: Installing HVAC Module Drain Tube To Module
      G01418680Courtesy of GENERAL MOTORS CORP.
    • Align the drain tube to contact the cowl as shown (1).
  2. Install the battery heat shield. Refer to BATTERY HEAT SHIELD REPLACEMENT in Engine Electrical.
  3. Install the battery. Refer to BATTERY REPLACEMENT in Engine Electrical.
scientia non olet · About LEMON Manuals