LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1168 (Engine Controls - 6.0L - Alternative Fuels (Introduction)) >> Repair Instructions >> Fuel Tank Bracket and Mounting Replacement (Pickup) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the CNG fuel tank. Refer to Fuel Tank Replacement (Pickup with Type 2 Tank)  or Fuel Tank Replacement (Cab/Chassis with Type 2 Tank) .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information in the C/K Pickup service manual.
    3. Fig 1: Locating Exhaust System Heat Shields
    GM707418Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust system heat shields.
    4. Fig 2: Identifying Frame Support Bracket Components
    GM769755Courtesy of GENERAL MOTORS CORP.
  4. Remove and discard the frame support bracket nuts (3).
  5. Remove the frame support brackets (4).
  6. Lower the vehicle.
  7. Remove the CNG fuel tank mounting frame.
  8. Discard the fuel tank frame mounting bolts.
scientia non olet · About LEMON Manuals