Conditions for Setting the DTC
WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Condition 1
- The ECM detects that the actual camshaft angle of a single intake camshaft is more than 20 degrees advanced in relationship to the crankshaft.
- The ECM detects that the actual camshaft angle of a single exhaust camshaft is more than 25 degrees retarded in relationship to the crankshaft.
- The camshafts are being commanded to the parked position.
Condition 2
- The learned angle of an intake camshaft is more than 14.5 degrees advanced in relationship to the crankshaft.
- The learned angle of an exhaust camshaft is more than 14.5 degrees retarded in relationship to the crankshaft.
Either condition exists for more than 10 minutes.