LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Engine Controls - Self-Diagnostics - 4.0L) >> Diagnostic Tests >> DTC P1381: Misfire Detected - No EBTCM/Pcm Serial Data >> Diagnostic Procedures

Diagnostic Procedures

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Did you perform the Diagnostic System Check - Engine Controls? If yes, go to next step. If no, go to DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS  under SELF-DIAGNOSTIC SYSTEM.
  2. Ensure ignition is on. Using scan tool, select Chassis Application and attempt to display ABS data. Can ABS data be displayed? If yes, see INTERMITTENT CONDITIONS  under SELF-DIAGNOSTIC SYSTEM. If no, perform anti-lock brake diagnostic system check. See DIAGNOSTIC SYSTEM CHECK in appropriate ANTI-LOCK article in BRAKES.