LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1155 (Engine Mechanical (Repair Instructions 4 Of 5) - 3.6L (Ly7)) >> Repair Instructions (Off-Vehicle Repair Instructions - Part 3) >> Primary Camshaft Drive Chain Guide Installation - Upper

Primary Camshaft Drive Chain Guide Installation - Upper

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Left & Right Secondary Camshaft Drive Chain Guide & Upper Primary Camshaft Drive Chain Guide
    GM1306378Courtesy of GENERAL MOTORS CORP.
  1. Ensure the upper primary camshaft drive chain guide (3) is being installed.
  2. Fig 2: View Of Upper Primary Camshaft Drive Chain Guides
    GM902846Courtesy of GENERAL MOTORS CORP.
  3. Install the upper primary camshaft drive chain guides.
  4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the upper primary camshaft drive chain guide bolts.

    Tighten:  Tighten the upper primary camshaft drive chain guide bolts to 23 N.m (17 lb ft).