LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1154 (Engine Mechanical (Repair Instructions 3 Of 5) - 3.6L (Ly7)) >> Repair Instructions (Off-Vehicle Repair Instructions - Part 2) >> Valve Lifter Removal - Right

Valve Lifter Removal - Right

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Stationary Hydraulic Lash Adjuster (SHLA)
GM946248Courtesy of GENERAL MOTORS CORP.
IMPORTANT:
  • Do not stroke/cycle the stationary hydraulic lash adjuster plunger without oil in the lower pressure chamber.
  • Do not allow the stationary hydraulic lash adjuster to tip over, plunger down, after the oil fill.

Remove the valve lifters, stationary hydraulic lash adjuster, (SHLAs) from the right cylinder head.

scientia non olet · About LEMON Manuals