LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1154 (Engine Mechanical (Repair Instructions 3 Of 5) - 3.6L (Ly7)) >> Repair Instructions (Off-Vehicle Repair Instructions - Part 2) >> Oil Pan Disassemble

Oil Pan Disassemble

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Level/Condition Sensor
    GM1408406Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level/condition sensor.
    2. Fig 2: Locating Oil Pan Drain Plug
    GM1408408Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pan drain plug.
    3. Fig 3: Identifying Oil Pan Scraper & Bolts
    GM1408410Courtesy of GENERAL MOTORS CORP.
  3. Remove the oil pan scraper bolts.
  4. Remove the oil pan scraper.
    5. Fig 4: View Of Oil Suction Pipe Bolts
    GM1408412Courtesy of GENERAL MOTORS CORP.
  5. Remove the oil suction pipe bolts.
  6. Remove the oil suction pipe.
    7. Fig 5: View Of Oil Suction Tube Seal & Oil Suction Tube
    GM1318091Courtesy of GENERAL MOTORS CORP.
  7. Remove the oil suction tube seal from the oil suction tube. Discard the oil suction tube seal.
scientia non olet · About LEMON Manuals