LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1154 (Engine Mechanical (Repair Instructions 3 Of 5) - 3.6L (Ly7)) >> Repair Instructions (Off-Vehicle Repair Instructions - Part 2) >> Engine Front Cover Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Front Cover Areas To Clean
    GM1408422Courtesy of GENERAL MOTORS CORP.
  1. Remove any RTV sealant (1) from the engine front cover using J 28410  .
  2. Clean out debris from the bolt holes.
  3. Clean the engine front cover in solvent.
    4. CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.
  4. Dry the engine front cover with compressed air.
scientia non olet · About LEMON Manuals