Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air deflector to the trim plate from the front.
- Push on the deflector until the deflector is firmly seated.
- Verify proper movement of the air deflector.
- Push the air duct onto the trim plate until the air duct is firmly seated.
- Install the trim plate to the console. Refer to Trim Plate Replacement - Console Rear (Rendezvous) in Instrument Panel, Gages, and Console.