LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1151 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Fig 1: View Of Lower Air Deflector/Baffle
    GM125807Courtesy of GENERAL MOTORS CORP.
  3. Remove the air baffle bolts.
  4. Remove the air baffle.
  5. Fig 2: Identifying A/C Refrigerant Pressure Sensor Electrical Connector
    GM669809Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the A/C refrigerant pressure sensor electrical connector.
  7. Remove the A/C refrigerant pressure sensor from the evaporator inlet tube.