LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Rear Suspension - Old Style) >> Removal & Installation >> Leaf Spring (Dual Wheel Spring Assembly) >> Removal

Leaf Spring (Dual Wheel Spring Assembly): Removal

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2000 GMC Yukon, 2000 GMC Pickup, 2000 GMC Cab & Chassis, 2000 GMC C3500 HD, and 2000 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle.
  2. Support the rear axle independently in order to relieve the tension on the leaf springs.
  3. Remove the U-bolt nuts (6). See Figure .
  4. Remove the washers (5).
  5. Remove the anchor plate (7).
  6. Remove the U-bolts (1 and 4).
  7. Remove the spacer (8), loosen the shackle to spring nut.
  8. Remove the shackle (3), the shackle to rear bracket nut, the washers, and the bolt. See Figure .
  9. Remove the spring to front bracket.
  10. Remove the nut, the washers, and the bolt from the spring to front bracket.
  11. Remove the spring assembly from the vehicle. See Figure .
scientia non olet · About LEMON Manuals