Harsh or Soft 1-2 Shift Feel
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Harsh or Soft 1-2 Shift Feel
| Checks |
Cause |
DEFINITION: One of the two following conditions occurs during a first to second gear steady throttle upshift, or a second to first gear coast, or a light to moderate throttle detent downshift:
- Harsh shift feel - an unacceptable quick gear change occurs.
- Soft shift feel - an unacceptable long gear change occurs.
|
| Automatic Transmission Fluid Level - soft shift only |
Low fluid level |
| Transmission Main Line pressure |
Low or high transmission main line pressure |
| Oil Filter Assembly - soft shift only |
- The oil filter assembly (100) is missing, plugged, or damaged.
- The oil filter seal assembly (101) is missing or damaged.
|
| 1-2 Accumulator Assembly |
- Misassembled or upside down 1-2 accumulator assembly
- Damaged or missing 1-2 accumulator piston oil seal ring (137A)
- A damaged or missing 1-2 accumulator piston cushion spring (139) or outer spring (142)
- A stuck or binding 1-2 accumulator piston (136A)
- Debris in the passages of the accumulator cover spacer plate (134)
|
| Control Valve Body Assembly |
- Debris in the passages of the control valve body (301) or spacer plate assembly (370)
- Missing or mislocated #2 ball check valve (372)
- Misassembled 1-2 accumulator valve (340-345) line-up
- Stuck or binding 1-2 accumulator valve (341)
- Damaged or missing 1-2 accumulator valve spring (340)
- Missing, damaged, or misassembled 2-3 accumulator valve bushing (345), bore plug (343), or retainers (342, 385)
|
| Driven Sprocket Support Assembly - soft shift only |
- A damaged second clutch housing oil seal rings (613) or the four lobe oil seal ring seals (612)
- Worn or damaged second clutch housing bushings (616, 619)
|
| Second Clutch Assembly |
- Missing or not seated second clutch basking plate retaining ring (627)
- Missing or misassembled second clutch backing plate (626)
- Worn, damaged or misassembled clutch plates (623-625)
- Missing or not seated second clutch spring retaining ring (622)
- A damaged spring assembly (621) or piston (620)
- A missing or damaged second clutch housing ball check valve assembly (618)
- A damaged second clutch housing assembly (617)
|