Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Brake Components

Courtesy of GENERAL MOTORS CORP.

Install the adjuster actuator lever (1).
Install the straight end of the adjuster spring (3) to the brake shoe.
Install the hook end of the adjuster spring to the adjuster actuator lever.

Fig 2: Identifying Park Brake Adjuster Actuator Components

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Ensure that the adjuster engages the brake shoes (4) and (5), the park brake actuator (3), and the adjuster actuator (1) properly.

Inspect the adjuster (2) for proper engagement with the drum brake system components.
Install the brake drum. Refer to Brake Drum Replacement .