LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1147 (Drum Brake System) >> Repair Instructions >> Brake Drum Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the marks on the brake drum and the hub made during the removal procedure.
    2. Fig 1: View Of Brake Drum
    GM390075Courtesy of GENERAL MOTORS CORP.
  2. Install the brake drum.
  3. Inspect the brake to shoe adjustment. Refer to Drum Brake Adjustment .
  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals