LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1142 (Shift Interlock System) >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Automatic Transmission Shift Lock Actuator Screws
    GM891835Courtesy of GENERAL MOTORS CORP.
  1. Install the actuator assembly (2) to the shift assembly (1).
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the actuator screws (3).

    Tighten:  Tighten the actuator screws to 2 N.m (18 lb in).