Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the air inlet duct. Refer to the appropriate service information.
- Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.4L.
- Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.6L (LY7).
- Use a hammer and a chisel in order to raise the transaxle vent seat off of the transaxle (37).
- Use a flat-bladed tool in order to pry the transaxle vent out of the transaxle (37).