Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Oil Pump

Courtesy of GENERAL MOTORS CORP.

Install the oil pump (200) to the valve body (300).

Fig 2: Identifying Oil Pump Bolt Lengths And Positions

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the oil pump bolts (205-207).
Tighten:
- Tighten the M6 X 1.0 X 20 bolt to 8 N.m (70 lb in).
- Tighten the M6 X 1.0 X 85 bolt to 12 N.m (106 lb in).
- Tighten the M6 X 1.0 X 95 bolt to 12 N.m (106 lb in).
Install the case side cover. Refer to Case Side Cover Replacement .