LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine Controls - Removal, Overhaul & Installation) >> Engine Sensors & Switches >> Downstream Heated Oxygen Sensor >> Removal (4.0L)

Removal (4.0L)

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Downstream Heated Oxygen Sensor (HO2S) may also be referred to as bank 1 sensor 2. Turn ignition off. Bank 1 sensor 2 is located behind catalytic converter. Raise and support vehicle. Disconnect bank 1 sensor 2 harness connector. Using HO2S Wrench (J-39194-B), carefully remove bank 1 sensor 2 from exhaust pipe.