EGR Valve: Installation
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
Install the EGR valve and a NEW gasket to the coolant crossover assembly. Install the EGR valve mounting studs. Tighten the studs to specification. See TORQUE SPECIFICATIONS . Install the EGR valve bracket to the mounting studs using the 2 nuts. Tighten to specification. Connect the electrical connector to the EGR valve. Install the fuel lines into the EGR valve bracket.
Install the cleaned or the replacement EGR valve using a NEW gasket. Install the EGR valve retaining nuts and bolts. Tighten retaining nuts and bolts to specification. See TORQUE SPECIFICATIONS .