LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1139 (HVAC Systems - Manual) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper I/P trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek) or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) in Instrument Panel, Gages and Console.
  2. Fig 1: Locating Actuator Connector
    GM295297Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the recirculation actuator electrical connector.
  4. Fig 2: View Of Mounting Screws On The Recirculation Actuator
    GM872107Courtesy of GENERAL MOTORS CORP.
  5. Remove the mounting screws from the recirculation actuator.
  6. Remove the recirculation actuator.