Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Open the seat belt guide loop cover.
- Remove the nut from guide loop.
- Remove the seat belt guide loop from the guide adjuster bracket.
- Remove the center pillar lower trim. Refer to Trim Panel Replacement - Lower Center Pillar in Interior Trim.
- Remove the bolts from the seat belt intermediate guide.
- Remove the seat belt intermediate guide from the center pillar.
- Remove the seat belt retractor bolt.
- Remove the seat belt retractor from the center pillar.
- Remove the anchor plate nut from the front seat stud.
- Remove the anchor plate from the front seat stud.