Intake Manifold Removal
WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and remove the brake booster hose from the upper intake manifold.
- Disconnect and remove the vehicle-to-solenoid evaporative (EVAP) hose from the EVAP solenoid.
- Remove the intake manifold-to-solenoid EVAP hose bracket bolt from the intake manifold.
- Disconnect and remove the intake manifold-to-solenoid EVAP hose from the intake manifold and from the EVAP solenoid.
- Remove the EVAP solenoid bolt.
- Remove the EVAP solenoid.
- Disconnect and remove the dirty air positive crankcase ventilation (PCV) hose from the intake manifold and the right camshaft cover fitting.
- Disconnect and remove the fresh air PCV hose from the left camshaft cover fitting.
- Remove the intake manifold bolts.
- Remove the intake manifold assembly.
- Remove the lower intake manifold gasket.
Fig 5: Dirty Air Positive Crankcase Ventilation (PCV) Hose (From Intake Manifold & Right Camshaft Cover Fitting)