Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the hoses (1) from the inflator solenoid.
- Remove the electrical connector (2) from the inflator solenoid.
- Remove the screws (3) from the inflator solenoid to the air compressor assembly bracket.
- Remove the inflator solenoid from the air compressor bracket.