LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1130 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Accessory Fill Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Accessory Fill Valve Access Cover
    GM865447Courtesy of GENERAL MOTORS CORP.
  1. Remove the accessory fill valve access cover.
  2. Remove the lower rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower (Aztek) or Trim Panel Replacement - Rear Quarter Lower (Rendezvous) in Interior Trim.
  3. Disconnect the air hose (1) from the accessory fill valve (5).
  4. Remove the cap (2), nut (3), and washer (4) from the accessory fill valve (5)
  5. Remove the accessory fill valve from the trim panel.
scientia non olet · About LEMON Manuals