Test Description
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
The number(s) below refer to the step number(s) on the diagnostic table.
- 2: Tests for mechanical damage to height sensor link.
- 3: Height sensor replacement.
DTC 013
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Automatic Level Control Suspension Schematics | |||
| 1 | Did you perform the Automatic Level Control Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Automatic Level Control (With Inflator) |
| 2 | Check the Automatic Level Control sensor link for damage or being disconnected. Did you find and correct the condition? |
Go to Step 4 | Go to Step 3 |
| 3 | Replace the Automatic Level Control Sensor. Refer to Automatic Level Control Sensor Replacement . Did you complete the replacement? |
Go to Step 4 | - |
| 4 | Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text. Does the DTC reset? |
Go to Step 2 | System OK |