LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1130 (Suspension Control System - Suspension Leveling) >> Description and Operation >> Automatic Level Control Description and Operation >> Tubing and Fittings

Tubing and Fittings

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

The snap-on connectors attach the tubing to the rear shock absorbers. The connector housings contain retainer clips. When a tubing is attached to a shock fitting, the retainer clip snaps into a groove in the shock fitting, locking the tubing in position. All tubing fittings are sealed with 2 O-rings.

scientia non olet · About LEMON Manuals