LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Engine Controls - Removal & Installation, Overhaul) >> Ignition Systems >> Crankshaft Position Sensor >> Removal (2.2L)

Removal (2.2L)

WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Disconnect negative battery cable. Raise and support vehicle. Disconnect starter wiring harness connectors. Remove starter bolts and starter. Disconnect Crankshaft Position Sensor (CKP) sensor harness connector. Remove CKP sensor bolt. Remove CKP sensor.

scientia non olet · About LEMON Manuals