Throttle Body: Installation
WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Identification number is stamped on throttle body. Use identification number to order replacement components.
- To install, reverse removal procedure using new gasket. Tighten throttle body retaining bolts to specification. See TORQUE SPECIFICATIONS . Refill cooling system (if drained). See COOLING SYSTEM .
- If installing a new Idle Air Control (IAC) valve, ensure IAC pintle length setting is adjusted before installation. See IDLE AIR CONTROL VALVE .