LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Engine Controls - Removal & Installation, Overhaul) >> Fuel Systems >> Fuel Pressure Regulator >> Removal (2.2L)

Removal (2.2L)

WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fuel pressure regulator is mounted to fuel rail. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect the vacuum pipe from the fuel pressure regulator. Place a shop towel under the fuel pressure regulator in order to catch any fuel spillage. Remove the retaining bolts from the fuel pressure regulator. Remove the fuel pressure regulator. Remove any seal or seal material left on the fuel rail.