Removal & Installation (2.2L)
WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Remove air cleaner outlet resonator, air cleaner intake duct and vent hose from throttle body. Disconnect cruise control cable and accelerator cable from the throttle body and accelerator bracket. Remove accelerator cable bracket. Disconnect the MAP sensor harness connector. See Figure . Remove MAP sensor from intake manifold. To install, reverse removal procedure. Use a new seal when installing MAP sensor.