Disassembly Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cylinder Line Assemblies & Rack & Pinion Gear Assembly

Courtesy of GENERAL MOTORS CORP.

Loosen both cylinder line fittings on the cylinder end of the gear assembly.
Loosen both fittings on the cylinder line assemblies (1) at the valve end of the gear assembly.
Remove both cylinder line assemblies (1) from the rack and pinion gear assembly (2).

Fig 2: View Of O-Ring Seals At Valve End Of Lines (Quiet Valve)

Courtesy of GENERAL MOTORS CORP.

Remove the O-ring seals (1) from the valve end of line.
Discard the O-ring seals (1).