LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1127 (Power Steering System) >> Repair Instructions >> Remote PS Fluid Reservoir Bracket Replacement (LY7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power steering reservoir bracket to the power steering reservoir.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Identifying Power Steering Reservoir Bracket Bolts
    GM1386753Courtesy of GENERAL MOTORS CORP.
  2. Install the power steering reservoir bracket bolts.

    Tighten:  Tighten the power steering reservoir bracket bolts to 6 N.m (5 lb ft).

  3. Install the power steering reservoir to the vehicle. Refer to Remote Power Steering Fluid Reservoir Replacement (LY7) .
scientia non olet · About LEMON Manuals