LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Engine Mechanical - 3.4L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement - Upper Radiator Support >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Bolt & Nut For Engine Mount Strut At Engine Mount Strut Bracket On Upper Radiator Support
    GM61850Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine mount strut from the engine mount strut bracket at the upper radiator support. Refer to Engine Mount Strut Replacement - Left  and/or Engine Mount Strut Replacement - Right .
    2. Fig 2: Engine Mount Strut Bracket Bolts
    GM61851Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine mount strut bracket bolts from the upper radiator support.
  3. Remove the engine mount strut bracket from the upper radiator support.
scientia non olet · About LEMON Manuals