LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Engine Mechanical - 3.4L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Bolt & Nut For Engine Mount Strut At Right Engine Mount Strut Bracket
    GM105887Courtesy of GENERAL MOTORS CORP.
  1. Remove the right engine mount strut from the right engine mount strut bracket. Refer to Engine Mount Strut Replacement - Right .
    2. Fig 2: Identifying Engine Mount Strut Bracket Bolt
    GM190592Courtesy of GENERAL MOTORS CORP.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the lower radiator baffle. Refer to Radiator Air Baffle Assemblies and Deflectors in Engine Cooling.
    4. Fig 3: Locating Air Conditioning Compressor Mounting Bolts
    GM277918Courtesy of GENERAL MOTORS CORP.
  4. Remove the air conditioning compressor mounting bolts. Refer to Compressor Replacement in Heating, Ventilation and Air Conditioning.
  5. Remove and set the air conditioning compressor aside.
    6. Fig 4: View Of Lower Engine Mount Strut Bracket Bolt
    GM155767Courtesy of GENERAL MOTORS CORP.
  6. Remove the lower engine mount strut bracket bolt from the right engine mount strut bracket.
  7. Lower the vehicle.
  8. Remove the vertical engine mount strut bracket bolt from the right engine mount strut bracket.
  9. Remove the right engine mount strut bracket.
scientia non olet · About LEMON Manuals