LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Engine Mechanical - 3.4L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Flywheel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Flywheel & Components
    GM54396Courtesy of GENERAL MOTORS CORP.
  1. Remove the automatic transaxle. Refer to Transmission Replacement (LA1) in Automatic Transaxle - 4T65-E.
  2. Remove the engine flywheel bolts and flywheel.
  3. Clean the engine flywheel bolt threads and bolt holes.
  4. Clean and inspect the engine flywheel. Refer to Engine Flywheel Cleaning and Inspection .
scientia non olet · About LEMON Manuals