Rotation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the throttle body air inlet duct. Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.4L.
- Set the park brake.
- Shift the transaxle into Neutral.
- Remove the engine mount strut bolts. Swing the engine mount struts aside.
- Install the J 41131 . See Special Tools and Equipment .
- Pull on the engine in order to rotate the engine forward.
- Tighten the J 41131 . See Special Tools and Equipment .