LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Engine Mechanical - 3.4L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Exhaust Manifold Removal - Right

Exhaust Manifold Removal - Right

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Heated Oxygen Sensor
    GM186996Courtesy of GENERAL MOTORS CORP.
  1. Remove the spark plug wires.
  2. Remove the spark plugs.
  3. Remove the EGR pipe from the exhaust manifold.
  4. Remove the heated oxygen sensor.
  5. Fig 2: View Of Right Exhaust Manifold Heat Shields & Bolts
    GM187050Courtesy of GENERAL MOTORS CORP.
  6. Remove the exhaust manifold heat shield bolts.
  7. Remove the exhaust manifold heat shields.
  8. Fig 3: Right Exhaust Manifold (3.4L)
    GM187052Courtesy of GENERAL MOTORS CORP.
  9. Remove the exhaust manifold nuts.
  10. Remove the exhaust manifold.
  11. Remove the exhaust manifold gasket.
  12. Remove the exhaust studs, if required.