LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Engine Mechanical - 3.4L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Engine Mount Strut and Air Conditioning Compressor Bracket Installation

Engine Mount Strut and Air Conditioning Compressor Bracket Installation

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Engine Mount Strut & A/C Compressor Bracket
    GM192655Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount strut and A/C Compressor bracket.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the engine mount strut and A/C Compressor bracket bolts.

    Tighten:  Tighten the engine mount strut and lift bracket bolts to 50 N.m (37 lb ft).